- Research article
- Open Access
Comparison of angle, shape, and position of articular processes in Dobermans and Great Danes with and without cervical spondylomyelopathy
BMC Veterinary Research volume 13, Article number: 77 (2017)
Cervical spondylomyelopathy (CSM), also known as wobbler syndrome, affects mainly large and giant-breed dogs, causing compression of the cervical spinal cord and/or nerve roots. Structural and dynamic components seem to play a role in the development of CSM; however, pathogenesis is not yet fully understood. Physiologic and pathologic movements of the cervical spine depend on the morphology and morphometry of articular processes, as well as on intervertebral discs and vertebral column ligaments. Moreover, the characteristics of the articular processes affect motion and stability of the vertebral column. The goal of this study was to investigate the angle, shape, and position of the articular surfaces within the articular processes and compare them between Doberman Pinschers and Great Danes with and without cervical spondylomyelopathy.
Magnetic resonance images were obtained for 60 dogs: 15 clinically normal Dobermans (Dob-N), 15 CSM-affected Dobermans (Dob-CSM), 15 clinically normal Great Danes (GD-N), and 15 CSM-affected Great Danes (GD-CSM). Angle, shape, and position (lateral distance) of the articular surfaces from the articular processes were analyzed from C2–3 to C7-T1. Results indicate that the mean angle was different between Dob-CSM and GD-CSM at C4–5, C5–6, and C6–7, and between GD-N and GD-CSM at C6–7. There were differences between Dob-N and GD-N, and between Dob-CSM and GD-CSM for the lateral distance at most locations, except C2–3. Compared with Great Danes, Dobermans generally had a greater proportion of concave caudal surfaces at C4–5, C5–6, and C6–7. Concave articular surfaces have been associated with greater axial rotation. This may explain the high proportion of disc-associated CSM in Dobermans compared to Great Danes. The differences between breeds suggest they may have different motion patterns in the caudal cervical vertebral column.
Considering that no differences in angle, shape, or position of the articular surfaces within the articular processes were found between normal and CSM-affected dogs, their relevance appears to have a secondary role in the pathogenesis of CSM.
Cervical spondylomyelopathy (CSM), commonly known as wobbler syndrome, is a disorder characterized by compression of the cervical spinal cord and/or nerve roots [1, 2] and can be divided into osseous-associated (OA-CSM) and disc-associated (DA-CSM), although overlap exists . Structural changes of the cervical vertebral column, along with dynamic components, appear to be involved in the pathogenesis of CSM; however, the individual contribution of each is not yet fully understood [1, 2]. Dynamic lesions, where compression worsens as the amount of the space available within the vertebral canal increases or decreases depending on flexion and extension of the neck , are thought to be in part a consequence of the decrease in vertebral canal diameter during cervical extension .
Physiologic and pathologic movements of the cervical spine depend on the articular process joints which, along with the intervertebral discs and the vertebral column ligaments, facilitate the transfer of loads and guide and constrain the motion of the vertebrae . Morphology, morphometry, and angle of the articular surfaces of the articular processes could affect the mechanical properties and patterns of motion of the articular process joints. As such, variations in articular process joint characteristics between breeds or vertebral levels could thus result in different motion patterns and be relevant to the pathogenesis of CSM [4–7]. A smaller horizontal angle, curved articular surfaces, and shorter distance from the center of the articular joint to the dorsal rim of the intervertebral disc have been associated with greater mobility [6, 7].
The objective of the present study was to investigate whether there are differences in the angle, shape, and position of the articular surfaces that form the articular processes between Doberman Pinscher and Great Dane dogs with and without CSM. Our primary hypothesis was that the articular surfaces would have a lower horizontal inclination angle, be more ventrally positioned, and with curved caudal articular surfaces in dogs with CSM. A second hypothesis was that there would be a significant difference between Dobermans and Great Danes, with Dobermans being supposed as having the aforementioned characteristics that would be considered related with greater mobility.
Magnetic resonance (MR) images of the cervical vertebral column of Doberman Pinscher and Great Dane dogs were retrospectively reviewed. All dogs had undergone thorough physical and neurological examinations. The MR studies consisted of at least sagittal and transverse T1- and T2-weighted images from C2 to T1, acquired using high-field magnets (1.5 T Magnetom Vision, Siemens; 3.0 T Achieva, Philips Healthcare), with a minimum of three transverse slices at each intervertebral disc level. The transverse images had been obtained parallel to the vertebral endplate. Slice thickness was 3 mm, with no interslice interval. For imaging, all dogs had received premedication with an opioid and a benzodiazepine or acepromazine and had been under general anesthesia using propofol and isoflurane and positioned in dorsal recumbency, with their cervical vertebral columns centered, extended and held in place with sandbags.
Dogs were included in the CSM-affected group if they had a confirmed diagnosis of CSM based on history, clinical signs, and presence of compatible magnetic resonance imaging (MRI) changes. Dogs were considered clinically normal based on absence of neurologic abnormalities at the time of the MRI scan and no history of neurologic disease. Dogs would have been excluded if they had unclear images of the articular surfaces, or MR image artifacts that interfered with visualization. All dogs were part of prospective studies carried out by the senior author [8–10].
T1-weighted images were used to obtain the measurements and perform the morphological analysis because they allowed clearer delimitation of the articular processes and their articular surfaces. All regions, from C2–3 to C7-T1, were studied. All analyses were performed by the same investigator (MAB), who was blinded to the clinical presentation of the dogs.
For measurements regarding the angle (Fig. 1) and lateral distance (Fig. 2) of the articular surfaces of the articular processes, the image with the clearest view of the articular surfaces for each articular process joint was selected. This was regularly the image that represented the middle of the articular joint. When two images were alike, the one closest to the cranial endplate of the caudal vertebra was selected. First, a vertical line was then drawn bisecting the spinous process and the intervertebral disc/vertebral body. Then, another line was drawn perpendicular to the first, with the most dorsal point of the floor of the vertebral canal as the reference line (Fig. 1). The articular surface of an articular process was considered to extend medially or laterally until a change in hyperintensity of the articular surface was observed. Both T1- and T2-weighted images were used to distinguish the articular surface from the hyperintense fat surrounding the articular process joint. All data were collected separately for left and right cranial and caudal articular surfaces/processes.
Angle of the articular surfaces
A line was drawn from the most lateral to the most medial point of the articular surface of each articular process, regardless of shape variations between these points. The angle was then determined in relation to the horizontal reference line (Fig. 1). This method was adapted from previous studies [6, 11, 12].
Shape of the articular surfaces
In order to establish the predominant shape of the articular surfaces of the articular processes, all available images for each articular process joint from C2–3 to C7-T1 were reviewed. To distinguish between shapes, a straight line was drawn from the medial to the lateral edge of the articular surface. Surfaces were classified as predominantly plane (less than 0.05 cm deviation), convex or concave (deviation greater than 0.05 cm to one side of the line), or sigmoid (deviations to both sides of the line) when that particular shape was present in the majority of images (Fig. 3). This classification was adapted from an osteological study . Irregular shapes were also classified as sigmoid. Minor deviations in form (approximately less than 20% of the articular surface), were discarded to reduce the influence of the edges of the articular surfaces, where the surface sometimes followed the shape of the articular process.
Distance of the articular surfaces to the floor of the vertebral canal
As a reference to the position of the articular surfaces, the distance from the most lateral point of the articular surface of each respective articular process to the reference line was measured. While not representing the center of rotation for the joint, this point was selected as a representation of the position of the articular surface (referred to as distance) because it was the most easily identifiable edge of the articular surface for the cranial (Fig. 2, measurement a) and caudal (Fig. 2, measurement b) articular processes. The images used for these measurements were the same as the ones used to obtain angle measurements.
Quantile-quantile plots were used to check if the variables had a normal distribution. There were no large deviations from normal and no outliers, and the dataset was therefore treated as having a normal distribution.
Means for surface angle and distance, as well as proportions of surface shapes, were compared between clinically normal Dobermans (Dob-N) and CSM-affected Dobermans (Dob-CSM), between clinically normal Great Danes (GD-N) and CSM-affected Great Danes (GD-CSM), between Dob-N and GD-N, and between Dob-CSM and GD-CSM. Comparisons were also made between functional spinal units (FSU – pair of articulating vertebrae and intervertebral disc) within each of the four groups for left and right articular processes separately. Left and right measurements were also compared per FSU for each group, using a t-test.
For angle and distance, these comparisons were made using multivariate ANOVA with Tukey multiple comparisons, adjusted for the height of the vertebral bodies of the dogs (for distance). For shape, chi-square tests were used to determine if there were differences between the proportions of articular surface shapes across vertebral levels between all four groups. Measurements and shape classifications were repeated, using the same MRI scans, on three randomly selected dogs from each group (n = 12; 20%) to calculate intraobserver agreement (after one month) using intra-class correlation and interobserver agreement using inter-class correlation. Statistical analyses were performed by a professional statistician using SAS Version 9.4. Significance was set at P < 0.05.
Sixty dogs were included: 30 Doberman Pinschers (15 CSM-affected and 15 clinically normal) and 30 Great Danes (15 CSM-affected and 15 clinically normal). The mean age for these dogs at the time of imaging was 6.3 years (3–12 years) for CSM-affected Dobermans; 4.3 years (2–8 years) for clinically normal Dobermans; 4 years (1–7.2 years) for CSM-affected Great Danes (mean age at onset 1.7 years); and 2.3 years (1–6.4 years) for clinically normal Great Danes.
Gender distribution for each group was: eight male and seven female CSM-affected Dobermans, eight female and seven male clinically normal Dobermans, 13 male and two female CSM-affected Great Danes, and eight male and seven female clinically normal Great Danes. Mean weight was 35 kg (26.3–50.8 kg) for CSM-affected Dobermans, 36.7 kg (26–52 kg) for clinically normal Dobermans, 57.8 kg (42–79.3 kg) for CSM-affected Great Danes, and 52.7 kg (40.5–73 kg) for clinically normal Great Danes.
The CSM-affected Dobermans had disc-associated CSM, with the main spinal cord compression at C6–7 (8), C5–6 (6), C4–5 (1). The main sites of spinal cord compression in the CSM-affected Great Danes, all of which had osseous-associated CSM, were C6–7 (8), C4–5 (3), C5–6 (2), C2–3 (1), and C3–4 (1). Seven CSM-affected Dobermans and thirteen CSM-affected Great Danes had multiple sites of compression, but the other compression sites were considered less clinically relevant.
Angle of the articular surfaces
In general, there were no differences in the angle of the articular surfaces between Dob-N and Dob-CSM or between GD-N and GD-CSM, except for C5–6 left cranial and C6–7 except for right caudal (greater for GD-CSM). When comparing breeds, there were differences between Dob-CSM and GD-CSM at C4–5, C5–6, C6–7 (greater for GD-CSM), but no differences between Dob-N and GD-N (Table 1).
Among FSU, there was no significant difference between angles at C6–7 and C7-T1, which were greater than the other FSU in Dob-N. In Dob-CSM, the angle measurements were significantly greater for C7-T1 than for most other FSU, except for C6–7 cranial and caudal articular surfaces on the right side. Also, there were generally no significant differences in angles between FSU among Great Danes except for C7-T1 in GD-N, which was greater than the other FSU. When comparing sides, there was no significant difference in any of the groups, except for GD-N at cranial C2–3 and caudal C5–6 and C6–7.
Shape of the articular surfaces
A predominant shape was recorded for all FSU except C7-T1, where the available transverse images did not consistently yield a predominant shape. There was a statistical difference in the proportion of shapes when comparing Dob-N with GD-N and Dob-CSM with GD-CSM, with an overall higher proportion of concave caudal processes in Dob-N (C4–5, C5–6, C6–7) compared with GD-N, and Dob-CSM (C4–5 and C5–6) compared with GD-CSM (Tables 2 and 3). Overall, there were no significant differences in the proportions of the four shapes between Dob-N and Dob-CSM or between GD-N and GD-CSM.
In general, when comparing FSU within a group, C3–4, C4–5, C5–6, and C6–7 had a greater proportion of concave caudal and convex cranial surfaces, while C2–3 had comparatively more sigmoid and plane shapes. Interestingly, three CSM-affected Great Danes exhibited medially angled sigmoid caudal surfaces at C2–3 (n = 2/15) and C3–4 (n = 1/15).
Distance of the articular surfaces to the floor of the vertebral canal
There were no statistical differences between mean distance measurements for Dob-N and Dob-CSM or between GD-N and GD-CSM. There were significant differences in mean cranial and caudal lateral distance measurements between Dob-N and GD-N and between Dob-CSM and GD-CSM, with higher values for GD-N and GD-CSM (Table 4).
Among FSU, both groups of Dobermans usually had higher values for C2–3, together with or followed by C7-T1, and then C3–4 through C6–7, with no difference from C3–4 through C6–7 for cranial and caudal lateral distances. In GD-N, measurements at C7-T1 were generally higher, followed by (cranial) or equal to (caudal) those for C2–3. In GD-CSM, C7-T1 values were higher for cranial and caudal lateral reference points, followed by C2–3. Comparison between sides showed no significant difference overall.
Intraobserver and interobserver agreement
Intra-class correlations for measurements were generally greater than 0.95 for intraobserver agreement. The highest correlation was seen for the lateral distance for the left cranial articular process (0.9765) and the lowest for the right cranial articular surface angle (0.9090). Shape identifications were 80% consistent, with the least consistency observed for the cranial left articular surfaces (73%) and the highest for the caudal left (85%).
For interobserver agreement, inter-class correlations for measurements were 0.8 in average, with the highest correlation for the lateral distance of the left cranial articular process (0.9373) and the lowest for the right caudal articular surface angle (0.6). Interobserver shape identifications were 69% consistent, with the least consistency observed for the caudal right (62%) and the highest for the cranial left articular surface (75%).
In this study, we investigated the angles, position (as given by lateral distance) and shapes of the articular surfaces of the cervical vertebral articular processes in Dobermans and Great Danes with and without CSM. Such a thorough investigation of these characteristics and their relationships with CSM had not been previously performed.
Although our second hypothesis, that there would be a difference between breeds, was confirmed, our primary hypothesis, that there would be significant differences in articular surface shape, angle, and position between CSM and non-CSM-affected dogs, was not confirmed.
Overall, there were no significant differences in angle, lateral distance, or predominant shape of the articular surfaces between Dob-N and Dob-CSM or between GD-N and GD-CSM, suggesting that biomechanical differences between dogs with and without CSM are likely not related to these characteristics in these breeds. These findings also suggest that a difference in the overall size of the articular processes as a consequence of the osseous changes commonly seen in CSM-affected Great Danes [10, 13], may not result in a significant difference in position of the articular surface itself.
Overall, the shape of the articular surfaces was not associated with clinical disease in either breed. There was, however, a significant difference in shape patterns between breeds (comparing Dob-N to GD-N and Dob-CSM to GD-CSM). In general, Dobermans had a greater proportion of concave caudal surfaces, which has been associated with a greater capacity for axial rotation [6, 14]. The higher proportion of concave caudal surfaces may explain why Dobermans typically have disc-associated CSM, whereas this form of CSM is uncommon in Great Danes. The shape of the articular surfaces may be partially responsible for the higher torsional forces seen in the caudal cervical region , facilitating development of intervertebral disc degeneration and protrusion in this region.
Interestingly, we found three medially angled sigmoid caudal surfaces in GD-CSM. These were considered the result of osseous proliferation with severe deformation of the articular process, although it cannot be ruled out that they could be an anatomical variant. However, this would likely not be related to the change in orientation observed in humans [4, 5] which does not occur in dogs [6, 16]. Also, sigmoid surfaces were observed as being medially concave-laterally convex or medially convex-laterally concave, with both sometimes present in the same dog, which had not been previously described .
Limitations of this study include a limited number of dogs per group. A greater number of subjects might have resulted in additional significant differences between clinically normal and CSM-affected dogs. Nonetheless, these numbers are consistent with previous comparative studies focusing on CSM [8, 17, 18]. A power analysis after completion of the study obtained a power of 75%. This power was considered adequate for this specific study.
The use of a single observer, though reducing variability, can be considered another limitation; however, intraobserver agreement indicated a high degree of reliability in the measurements and interobserver agreement was considered good for the majority of the measurements . Although another limitation can be the selection of a single image of the articular surface for the measurements, which would not be representative of the variations within a joint, this permits standardization of the measurement method and is consistent with other studies that looked at articular surface angles [11, 12].
Other comparisons, such as between sites with and without spinal cord compression or between the sites immediately cranial or caudal to a site of spinal cord compression and sites that were not adjacent to a site of spinal cord compression, would have been interesting, however, there were not enough compression sites in CSM-affected Dobermans or sites without compression in CSM-affected Great Danes to make such comparisons worthwhile. Furthermore, joining all sites of compression regardless of location (C2–3, C3–4, C4–5, C5–6, C6–7, C7-T1) would likely result in another type of error since most of the compression sites were in the caudal cervical vertebrae.
Differences in angle, shape, and position of the articular surfaces between Dobermans and Great Danes suggest that the movements of the caudal cervical region of the vertebral column may differ between these breeds. The higher proportion of concave articular surfaces in Dobermans may explain why this breed has a higher proportion of disc-associated CSM compared to Great Danes.
Considering that no differences in angle, shape or position of the articular processes were found between normal and CSM-affected Dobermans or Great Danes, their relevance to the development of CSM in these breeds appears to have a secondary role.
Disc-associated cervical spondylomyelopathy
Cervical spondylomyelopathy-affected Doberman Pinschers
Clinically normal Doberman Pinschers
Functional spinal unit
Cervical spondylomyelopathy-affected Great Danes
Clinically normal Great Danes
Magnetic resonance imaging
Osseous-associated cervical spondylomyelopathy
da Costa RC. Cervical spondylomyelopathy (wobbler syndrome) in dogs. Vet Clin North Am Small Anim Pract. 2010;40:881–913.
De Decker S, da Costa RC, Volk HA, Van Ham LM. Current insights and controversies in the pathogenesis and diagnosis of disc-associated cervical spondylomyelopathy in dogs. Vet Rec. 2012;171:531–7.
Ramos RM, da Costa RC, Oliveira AL, Kodigudla MK, Goel VK. Morphological changes of the caudal cervical intervertebral foramina due to flexion-extension and compression-traction movements in the canine cervical vertebral column. BMC Vet Res. 2015;11:184.
Jaumard NV, Welch WC, Winkelstein BA. Spinal facet joint biomechanics and mechanotransduction in normal, injury and degenerative conditions. J Biomech Eng. 2011;133:071010.
Pal GP, Routal RV, Saggu SK. The orientation of the articular facets of the zygapophyseal joints at the cervical and upper thoracic region. J Anat. 2001;198:431–41.
Breit S, Künzel W. Shape and orientation of articular facets of cervical vertebrae (C3-C7) in dogs denoting axial rotational ability: an osteological study. Eur J Morphol. 2002;40:43–51.
Benninger MI, Seiler GS, Robinson LE, Ferguson SJ, Bonél HM, Busato AR, et al. Effects of anatomic conformation on three-dimensional motion of the caudal lumbar and lumbosacral portions of the vertebral column of dogs. Am J Vet Res. 2006;67:43–50.
da Costa RC, Parent JM, Partlow G, Dobson H, Holmberg DL, Lamarre J. Morphologic and morphometric magnetic resonance imaging features of Doberman Pinschers with and without clinical signs of cervical spondylomyelopathy. Am J Vet Res. 2006;67:1601–12.
Foss K, da Costa RC, Rajala-Schuttz PJ, Allen MJ. Force plate gait analysis in Doberman Pinschers with and without cervical spondylomyelopathy. J Vet Intern Med. 2013;27:106–11.
Martin-Vaquero P, da Costa RC. Magnetic resonance imaging features of Great Danes with and without clinical signs of cervical spondylomyelopathy. J Am Vet Med Assoc. 2014;245:393–400.
Boden SD, Riew KD, Yamaguchi K, Branch TP, Schellinger D, Wiesel SW. Orientation of the lumbar facet joints: association with degenerative disc disease. J Bone Joint Surg Am. 1996;78:403–11.
Lee DY, Ahn Y, Lee SH. The influence of facet tropism on herniation of the lumbar disc in adolescents and adults. J Bone Joint Surg (Br). 2006;88:520–3.
Gutierrez-Quintana R, Penderis J. MRI features of cervical articular process degenerative joint disease in Great Dane dogs with cervical spondylomyelopathy. Vet Radiol Ultrasound. 2012;53:304–11.
Hofstetter M, Gédet P, Doherr M, Ferguson SJ, Forterre F. Biomechanical analysis of the three-dimensional motion pattern of the canine cervical spine segment C4-C5. Vet Surg. 2009;38:49–58.
Johnson JA, da Costa RC, Bhattacharya S, Goel V, Allen MJ. Kinematic motion patterns of the cranial and caudal canine cervical spine. Vet Surg. 2011;40:720–7.
Breit S, Künzel W. A morphometric investigation on breed-specific features affecting sagittal rotational and lateral bending mobility in the canine cervical spine (C3-C7). Anat Histol Embryol. 2004;33:244–50.
De Decker S, Gielen IM, Duchateau L, van Bree HJ, Waelbers T, Bavegems V, et al. Morphometric dimensions of the caudal cervical vertebral column in clinically normal Doberman Pinschers, English Foxhounds and Doberman Pinschers with clinical signs of disk-associated cervical spondylomyelopathy. Vet J. 2012;191:52–7.
Martin-Vaquero P, da Costa RC, Lima CG. Cervical spondylomyelopathy in Great Danes: a magnetic resonance imaging morphometric study. Vet J. 2014;201:64–71.
Shrout PE. Measurement reliability and agreement in psychiatry. Stat Methods Med Res. 1998;7:301–17.
Dr. Bonelli received a scholarship grant from the Coordination for the Improvement of Higher Education Personnel (CAPES), Brazil. CAPES was not involved in any stage of this study. We would like to thank Dr. Steven Naber and Abhijoy Saha for their assistance with statistical analysis.
Availability of data and materials
MAB, RCDC, and PMV participated in conception and design of the study. MAB and CGD performed the measurements and interpreted the results along with RCDC. All authors contributed to, read, and approved the final version of the manuscript.
The authors declare that they have no competing interests.
Consent for publication
Ethics approval and consent to participate
This is a retrospective imaging study. No live animals were recruited for this study, however, the images used in this study had been previously obtained in accordance with the guidelines and with approval of the Clinical Research Advisory Committee and the Institutional Animal Care and Use Committee of The Ohio State University.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Angle of the cranial and caudal articular surfaces to the reference line for clinically normal Doberman Pinschers. Angle measurements for the articular surface of the right (R) and left (L) cranial and caudal articular processes in 15 clinically normal Doberman Pinschers (Dob-N). (XLSX 18 kb)
Angle of the cranial and caudal articular surfaces to the reference line for Doberman Pinschers with cervical spondylomyelopathy. Angle measurements for the articular surface of the right (R) and left (L) cranial and caudal articular processes in 15 Doberman Pinschers with cervical spondylomyelopathy (Dob-CSM). (XLSX 18 kb)
Angle of the cranial and caudal articular surfaces to the reference line for clinically normal Great Danes. Angle measurements for the articular surface of the right (R) and left (L) cranial and caudal articular processes in 15 clinically normal Great Danes (GD-N). (XLSX 18 kb)
Angle of the cranial and caudal articular surfaces to the reference line for Great Danes with cervical spondylomyelopathy. Angle measurements for the articular surface of the right (R) and left (L) cranial and caudal articular processes in 15 Great Danes with cervical spondylomyelopathy (GD-CSM). (XLSX 18 kb)
Distance from the lateral edge of the cranial and caudal articular surfaces to the reference line for clinically normal Doberman Pinschers. Distance (in centimeters) from the lateral edge of the articular surface of the right and left cranial and caudal articular processes to the reference line in 15 clinically normal Doberman Pinschers (Dob-N). (XLSX 23 kb)
Distance from the lateral edge of the cranial and caudal articular surfaces to the reference line in Doberman Pinschers with cervical spondylomyelopathy. Distance (in centimeters) from the lateral edge of the articular surface of the right and left cranial and caudal articular processes to the reference line in 15 Doberman Pinschers with cervical spondylomyelopathy (Dob-CSM). (XLSX 24 kb)
Distance from the lateral edge of the cranial and caudal articular surfaces to the reference line in clinically normal Great Danes. Distance (in centimeters) from the lateral edge of the articular surface of the right and left cranial and caudal articular processes to the reference line in 15 clinically normal Great Danes (GD-N). (XLSX 23 kb)
Distance from the lateral edge of the cranial and caudal articular surfaces to the reference line in Great Danes with cervical spondylomyelopathy. Distance (in centimeters) from the lateral edge of the articular surface of the right and left cranial and caudal articular processes to the reference line in 15 Great Danes with cervical spondylomyelopathy (GD-CSM). (XLSX 23 kb)
About this article
Cite this article
Bonelli, M.d., da Costa, R.C., Martin-Vaquero, P. et al. Comparison of angle, shape, and position of articular processes in Dobermans and Great Danes with and without cervical spondylomyelopathy. BMC Vet Res 13, 77 (2017) doi:10.1186/s12917-017-0997-4
- Articular facets
- Cervical spine
- Facet joint
- Wobbler syndrome
- Zygapophyseal joint